You are here:

Inclinometer Casing

Inclinometer Casing are designed for long-term monitoring even in the most adverse field conditions. They undergo deformation along with the movements of the ground/structure where they are placed, allowing for maximum flexibility, and are used to send data to inclinometer devices. The inclinometer devices move easily along the casing thanks to the full-length rails on them. Manufactured with ABS raw material for the highest quality possible, the casing are typically 3m long and are connected to each other by riveting.

They can be used in boreholes, backfills, concrete structures, and piles.

When vertical settlement or heaving is expected to exceed 2%, the use of telescopic sections is recommended to eliminate the axial load that could cause bending on the body. Bottom and top covers and connection rivets can also be provided.

Downloads

Specifications

Diameter60mm - 70mm
MaterialABS
Strenght710 Kgf
Working Temperature-20 +80°C
Lenght3m